Mission 778X maintains the influence of simplistic operation, large tractile controls, and a multitude of inputs. It’s a compact, ’80s inspired integrated amplifier that is fully equipped to meet the demands of modern music lovers, from vinyl fans to digital streamers. Modern twists, such as LED level indicators and all-encompassing connectivity options, make the 778X a truly contemporary integrated amplifier. Boasting a genuine 65 watts (@4 ohms) of power via an utterly modern and refined signal path, to standards akin to the exemplary standards to which Mission loudspeakers are developed.
SPEC
Inputs: 1 x Coaxial, 2 x Toslink Optical, 1 x PC USB, 1 x Bluetooth (aptX/AAC),2 x AUX,1 x RCA (Phono MM)
Outputs: 1 x Coaxial, 1 x Toslink Optical, 1 x RCA (PRE Out)
Sampling Frequency: Optical / Coaxial: 44.1kHz-192kHz; PC USB:44.1kHz-384kHz(PCM) / DSD64, DSD128, DSD256
Preamplifier Section
Gain (max.): +0dB (Line), +47dB (Phono MM)
Input Sensitivity: 540mV (Line, Volume = 0dB); 2.5mV (Phone MM, Volume = 0dB)
Input Impedance: 10K (AUX); 47K//100pF (Phono MM)
Total Harmonic Distortion (THD): <0.003%
Frequency Response (ref. 1kHz): 20Hz-20kHz (±0.1dB)
PRE Output Level: 2.1Vrms (max.)
PRE Output: SNR >110dB (A-weighted)
DAC
D to A Converter: ESS Sabre32 ES9018K2M
Resolution: 32-bit
Max. Sampling Frequency Optical/Coaxial: 192kHz;
USB: PCM 384kHz / 11.2896MHz (DSD256)
Total Harmonic Distortion (THD): < 0.001% (1KHz @ 0dBFS)
Output level (0dBFS, 1KHz): 2.1Vrms
Power Amplifier Section
Gain: +31dB
Rated Power Output: 2x45W(@8ohms); 2 x 65W (@ 4 ohms)
Frequency Response (ref. 1kHz): 20Hz-20KHz (± 0.5dB)
Total Harmonic Distortion (THD): <0.005% (30W / 8 ohms)
Input Sensitivity: 540mV (RCA AUX In); 2.5mV (Phono MM)
Signal-to-Noise Ratio (SNR): >108dB (ref. 45W, A-weighted)
Crosstalk @1K: >80dB (ref.1W)
Standby Power Consumption: <0.5W
Headphone Amplifier
Total Harmonic Distortion (THD): < 0.01% (1kHz, 50mW )
Output Impedance: 4.7 ohms
Load impedance: 20-600 ohms
General
Dimensions (mm) (W x H x D): 236x98x380.6
Carton Size (mm) ( W X H X D): 450x392x175
Net Weight: 6.3kg
Finish: Black / Silver
Power requirements (depending on region): 220-240V ~ 50/60Hz
Standard Accessories: Power Cord, Remote Control, User Manual, Antenna
Within the IDG format, the all-new Mission 750 model, just like the 700 and 770, uses a newly developed polypropylene bass/midrange driver and motor system but is now in a new 5.25” profile specifically designed for this model. This innovative cone and driver technology not only enhances the loudspeaker’s overall design to meet modern power handling and dynamic requirements, but it also maintains the 700 series extended response and low colouration.
Every aspect, from the rigid, cast chassis to the low-density surround, has been thoroughly examined to deliver a driver with greater rigidity and precision-controlled cone-termination for dynamic performances and tight, fast, and energetic output.
High-frequency reproduction is provided by the 28mm, lightweight, coated microfibre dome, as found in the Mission 700 model, and likewise, placed below that bass/midrange driver.
With a high-frequency performance eerily close to that of the flagship 770, the Mission 750 also incorporates a specially damped rear chamber which aids in resonance control, extends bandwidth and facilitates the crossover frequency for super smooth treble performance.
Model: Mission 750
General description: Two-way standmount
Design philosophy and core technology
Enclosure type: Bass reflex
Transducer complement: 2-way
ABR
Bass driver: 5.25" (135mm) mineral loaded polypropylene cone
Treble driver: 1.25" (28mm) Soft Dome
Full-range driver
AV shield: No
Sensitivity (2.83V @ 1m): 86dB
Recommended amplifier power: 25W - 100W
Peak power handling
Peak SPL: 103dB
Nominal impedance: 6Ω (Compatible 8Ω)
Minimum impedance: 4.5Ω
Frequency response(+/-3dB): 48Hz - 20kHz
Bass extension(-6dB): 42Hz
Crossover frequency: 2.4kHz
Cabinet Volume (in litres): 12.2L
Dimensions (mm) HxWxD :355mm* 216mm *(270 + 35) mm
Carton size: 565 * 395 * 485 mm
Net weight:9.0kg / pcs
Gross weight: 19.5kg / ctn
Finish:Walnut or Black Oak real wood veneer with white bafe finish
Standard accessories:rubber feet
